Home | Pricing | Company | Contact | Store
NTSC/PAL Digital Color Corrector Model VP900D
Description - PDF Spec Sheet

Xintekvideo's Color Corrector Model VP-900D is an all digital video processor with analog input/output interfaces. It is designed to be a full-featured color corrector to match video to any display characteristics.

The Model VP-900D provides a wide-range control of amplitude and pedestal for each primary color, permitting full color balance of highlights as well as low lights. Other controls provided by the Model VP-900D include hight frequency boost (0 to 6dBs of boost available), gamma correction (with gamma curves from 0.3 to 1.5), and luminance set-up.

The Model VP-900D will not affect signals imbedded in blanking as it automatically goes into process bypass during non video time. The VP-900D also offers all the options available with the Model SDI-900* which includes random noise reduction, up to 400 process presets, and SDI input/outputs.

Front Panel Controls:
Red Gain: 40%
Red Pedestal: 25 IRE
Blue Gain: 40%
Blue Pedestal: 25 IRE
Green Gain: 40%
Green Pedestal: 20 IRE
Y set-up: 12 IRE
Y HF Boost: 0 to 6 dBs
Y Gamma: 0.3 to 1.5
Noise Reduction (optional)
Y Noise Reduction: 0 dB to 9 dB (Motion and initial picture quality dependent)
R-Y and B-Y Noise Reduction: 0 dB to 9 dB (Motion and initial quality dependent)
Noise Reduction manually adjustable or automatic.
Pre-set Features (optional)
Presets: Any front panel setting may be stored in one of seven non-volatile memory banks and selected at will for pre-set operation. Up to 400 memory banks optionally available.
Additional Specifications:
Input: NTSC or PAL analog video signal, 1volt pp into 75 Ohms. Optional 4:2:2 Serial Digital Video at 270Mbs.
Unprocessed Output: Equalized and re-clocked serial digital video (optional)
Processed Output: Analog NTSC or PAL video output, 1 volt pp into 75 Ohms. Optional: Two serial digital video outputs at 270Mbs. Video processing is at 10 to 12 bit accuracy. Any ancillary data in the video stream is automatically passed through to the output.
System Delay: approximately 140 usec.
Overflow Clipping: If processing causes overflow, output video is clipped at hexadecimal levels 0004 and 03FA of the optional digital output. Note, this exceeds the recommended minimum and maximum levels of the SDI signal specifications as it uses the full dynamic range available in the digital format.
Environmental:
Temperature: 32 F to 105 F, Ambient
Humidity: 10% to 90%, non-condensing
Mechanical:
Height: 1.75"H
Width: 19"W
Length: 11"D
Weight: 7 lbs.
Power: 90-240 volts AC, 50/60Hz, 12 Watts
Specification subject to change without notice. 9/2004
Xintekvideo Products
Transcoders & Converters
SDI-313 - Universal Transcoder
SDI-1 - D1 to NTSC Converter
SDI-3 - Analog to SDI Converter
SDI-110 - SDI to Analog Converter
SDI-310 - NTSC to D1 Converter
SDI-330 - Noise Reducer/SDI Converter
SDI-333 - Universal SDI Converter
Video Processors
INR 2000 - Impulse Noise Eliminator
INR ES - Impulse Noise Reducer
HQ 2000 - Picture Quality Restorer
CF110 - Co-Channel Filter
DP2000 - Drop-Out Corrector
Video Improvement Processors
VP10A - Random Noise Reducer
VP10C - Components Noise Reducer
SDI-10 - Random Noise Reducer
VP55A - Noise Reducer/Ghost Canceler
VP100 - Video Processor/Noise Reducer
VP900A - NTSC Color Corrector
VP900D - NTSC/PAL Color Corrector
VP1000 - Picture Quality Restorer
VP3000 - Pre-Compression Processor
HD-900M/950M - High Definition Color Corrector
SDI-900*-Color Corrector/Video Processor
Home | Pricing | Company | Contact | Store